READ THE LATEST
DIGITAL ISSUE

Design Solutions

Site search Advanced


Mini weather-proof connectors withstand outdoor advertising demands

Published: 15 May 2013 - Rachael Morling

It is common to see an advert for the nearest fast food outlet or the latest cinema release illuminated by an advertising light box in every town in the UK. Positioned by bus stops, elevators and even national monuments, these advertising boards can command a high premium in terms of rates, but that’s dependant on their reliability. To help, Hylec-APL supplies a range of compact waterproof connectors which keep the boards shining in any weather.

Stock Displays manufactures high-spec display products for both internal and external use, including light box display boards for use in public areas. The boxes illuminate their message making them clearer to read and ensuring that they stand out from hoard of posters we are all accustomed to. With customers including Marks and Spencer, Waitrose and the Royal Albert Hall, it needs to be sure that its products can withstand daily use and continue to display their messages in wind, rain and snow.

James Edwards, managing director of Stock Displays, comments: “Some of the locations that our light boxes are positioned in can command thousands of pounds per week in advertising. Obviously when people are paying that much they want to be sure that there message is getting across. Light boxes which are positioned outside in public spaces need to be able to withstand the great British weather, but also regular knocks and bumps from passersby. All the components we specify for our products are of the highest standards to ensure reliability year on year.”

The light boxes need to be as compact as possible to make sure that they aren’t disruptive to flow of pedestrians as they pass by, meaning all the components need to be as small as possible without compromising on reliability. So, Stock Displays approached Hylec-APL to enquire about its weather-proof range of components.

Meeting requirements was the new Mini-TEETUBE series TH391, the latest addition to the TEE family of weatherproof products which offer quick and easy installation with IP68 ingress protection. Introduced as an alternative to the original mini-TEETUBE (series TH390), the new product has a reduced diameter of only 23mm and a length of 60mm. This, claims the company, makes it one of the smallest IP68 electrical connectors on the market which doesn’t depend on silicone gel to protect the wiring from moisture ingress.

With the connector design, the terminal block forms part of the external housing to achieve its tiny footprint. The wire is inserted through each end of the connector and then secured into the terminal block. The terminal block features secure sealing and can be directly screwed to the connector’s entry points. The IP68 seal is then formed using the dome topped cable glands which form the entry points of the connector.

James continues: “The new mini-TEETUBE is exactly what we needed for our application. Because the product uses cable glands to form the seal there is in built cable retention, as well as ingress protection, which protects the internal wiring from all of the hazards of the light boxes public location. The compact nature of the product means that it fits perfectly in the limited space available to it, yet it’s quick and easy to wire.”

www.Hylec-APL.com

Industry Connections: Hylec APL


 
Search for a product/supplier:
 
   
-November 2017+
SMTWTFS
2930311234
567891011
12131415161718
19202122232425
262728293012
3456789