READ THE LATEST
DIGITAL ISSUE

Energy Management

Site search Advanced


Get a fast payback with synchronous motors

Published: 11 October 2012 - Joe Bush

As Marek Lukaszczyk of WEG UK explains, synchronous motors are increasingly the motor of choice in high power, heavy load applications. This is due to their ability to reduce electrical energy costs, and improve energy efficiency by correcting power factor on the motor power supply

Because of the size and nature of the applications in which synchronous motors are used, the energy savings can be considerable, and often result in fast payback of the motor expenditure - with all subsequent savings helping to reduce the user’s operating costs.

Synchronous motors provide high efficiency in applications that require power factor correction and high torques and constant speed under load variation, resulting in low operating and maintenance costs. These benefits explain the use of the motors in the widest range of applications. Typically these include crushers, mills and conveyor belts in mining and quarry operations; fans, pumps and compressors in steel plants; pulp and paper extruders; chippers and de-barkers in wood processing; sewage system pumps; large compressors and fans in chemical and petrochemical applications; mills and crushers in cement works; and water injection pumps on floating oil platforms.

DC motor replacement

As they have a higher efficiency level, reduced size and higher output rating capacity, synchronous motors can replace DC motors in high performance applications. In addition, in a number of instances, a motor with lower torque values, compared to standard, can actually be applied. This brings a positive reduction in motor starting current, resulting in fewer problems with the electric system during starting, together with a reduction of mechanical stresses from the motor windings.

Synchronous motors have better efficiency and speed accuracy than induction motors. However, when comparing the two, the design of synchronous motors is more complex. As a result, induction motors are less expensive for a given power level, at power outputs up to 10kW. However, above this figure the higher efficiency of synchronous motors delivers lower operating costs.

The higher efficiency is the result of synchronous motors being superior at converting electrical energy into mechanical power. Moreover, synchronous motors can be designed for high efficiency operation across a broad speed range, providing significant energy saving across a wide variety of loads. In addition, for applications requiring high torque (crushers, extruders, etc), breakdown torque with synchronous motors can be as much as five times higher than the rated torque.

An additional benefit of synchronous motors is their ability to improve stability in VFD applications. Synchronous motors with variable speed are recommended for applications with high torque, low speed and wide speed adjusting range. Depending on load and environment characteristics, motor construction for such applications can be with or without brushes. These motors are suitable to operate at any speed range from zero to maximum speed, maintaining stability independent from load variation - a factor of paramount importance on equipment such as laminators and plastic extruders.

Reduced maintenance

The reductions in day to day running costs delivered by synchronous motors are complemented on brushless type machines by reduced maintenance costs. Since the motors are not manufactured with brushes or with slip rings, maintenance, involving inspection and cleaning of these components, is not required.

Synchronous motors require a DC power supply to power the field winding (rotor winding), which is achieved through a brushless rotating exciter (on brushless versions), or via a static exciter on motors with brushes. WEG synchronous motors supplied with static exciters are fitted with slip rings and brushes that allow current powering of the rotor poles through slipping contacts. The DC power supply for the poles is derived from an AC/DC converter and static controller. The static exciter is widely used in VFD applications.

WEG synchronous motors with a brushless excitation system are fitted with a rotating exciter, normally installed on the rear of the motor. Depending on motor operation, the exciter either consists of an exciter with DC power supply on the stator, or one with an AC power supply on the stator.



 
Search for a product/supplier:
 
   
-June 2019+
SMTWTFS
2627282930311
2345678
9101112131415
16171819202122
23242526272829
30123456