READ THE LATEST
DIGITAL ISSUE

Factory Equipment

Site search Advanced


Take control - Solid-state fuses for the 24V circuit

24 January 2019

New modular, solid-state fuse units from ifm electronic give the user much greater control over their circuits.  Modules in the DF system control single or dual channels with loads up to 10A per channel, and up to eight modules can be attached to the base unit. 

The DF series uses the latest IO-Link technology for bidirectional communication with the PLC.  This allows the user to enable each channel independently, allowing a phased start-up of a complex system, for example, to avoid a big inrush that would otherwise trip a traditional fuse.  If a trip does occur, the circuity can also be reset remotely.

Data exchange also leads to more information about the machine; the DF will tell the PLC the actual current and voltage of each channel, so the power consumption is split down to individual circuits.  The cause of any trip can also be determined, i.e. an overload or a short-circuit.

ifm is committed to working closely with its customers to develop products which precisely match their needs, and the company provides expert, readily accessible technical support to help users maximise the benefits they gain from ifm products.

For further information, contact Gemma Anderson, ifm electronic Ltd., efector House, Kingsway Business Park, Oldfield Road, Hampton, Middlesex, TW12 2HD. 

Telephone:  020 8213-0000. 

E-mail – gemma.anderson@ifm.com.

https://www.ifm.com/gb/en

https://www.ifm.com/gb/en/product/DF1100

 

 

 



 
Search for a product/supplier:
 
   
-August 2019+
SMTWTFS
28293031123
45678910
11121314151617
18192021222324
25262728293031
1234567