DHF publishes new document on changes to CE marking of fire and smoke resisting industrial doors
Published: 6 September 2019 - Victoria White
Tamworth-based trade association, DHF (Door & Hardware Federation), has published a new downloadable document for the industrial door sector, named Changes to CE marking of Fire and Smoke Resisting Industrial Doors. The long-awaited publication reveals what is required, and is to be used, in conjunction with DHF TS012:2019 and is now accessible from the federation’s website.
CE marking of powered doors, whether fire/smoke resisting or not, has been mandatory under the Machinery Directive since 1995; this remains a constant and will not change.
As of November 2019, there will be significant additional requirements for CE marking of both powered and manual fire and smoke resisting doors covered by EN 13241:2003+A2:2016. This is because compliance with the Construction Products Regulation (EU) 305/2011 (CPR) becomes mandatory for both manual and powered fire resisting industrial doors on this date.
Whilst many manufacturers have been CE marking their products under the new rules on a voluntary basis during the co-existence period, the new rule will become compulsory from November 2019.
“DHF’s new publication is supplementary to, and should be used in conjunction with, DHF TS 012, and covers industrial doors and shop front shutters covering doorways that have fire/smoke resisting properties. It is important to note that it does not cover pedestrian doors, except for retail shutters (which clearly resemble a shutter in a warehouse more than they do a hinged or sliding pedestrian fire door). For CE marking purposes, only fire test evidence to EN 1634-1 can be used,” explains DHF’s General Manager and Secretary, Michael Skelding.
“Existing fire shutters tested to BS 476-22 remain acceptable, but fire shutters placed on the market after 1 November this year will need the CE mark. As well as fire test evidence, the CE mark must be supported by evidence of the shutter’s ability to self-close and its safety in everyday use. We hope that our new guide will help to make this clear. It is worth noting that fire shutters, new or old, are not exempt from normal health and safety rules for doors in a workplace.”
DHF’s new publication can be downloaded here: https://www.dhfonline.org.uk/publications/ce-marking/3.htm
Source: Industrial Compliance