Electrical Engineering

Site search Advanced


Increasing protection at new rugby stadium

Prysmian’s FP200 Gold has just been installed into the fire alarm and the voice alarm PA system at St Helens RFC’s new home stadium, Langtree Park. The Saints have officially left their old ground at ... more

New website for test and measurement equipment

NICEIC has launched a new website offering contractors test and measurement equipment at competitive prices. The site features a range of products and services from leading manufacturers such as ... more

Marshall-Tufflex invest in Middle East markets

Cable management manufacturer, Marshall-Tufflex, will be showcasing its range of conduit and fittings plus Mini and Maxi trunking profiles at Middle East Electricity exhibition (February 7-9th at ... more

Machine safety workshop comes to the North West

On Tuesday 31st January Leuze will be hosting its next free to attend ‘Introduction to Machine Safety’ training workshop at the offices of the HMK Direct in Congleton, East Cheshire - the first time ... more

Control systems for Maltese hospital

Sontay has provided a range of building control peripherals and field device products to the new Mater Dei Hospital, one of the largest building automation projects to take place in Malta in recent ... more

Building on the success of 2010

The drives & Controls show 2012 will be taking place at the NEC in Birmingham from 17th-19th April, and exhibition organisers are optimistic that the event will exceed both the exhibitor and ... more

Surviving lightning strikes

PULS, the DIN-rail power supply manufacturer, has carried out extreme testing of its QT40 3-phase units by subjecting them to simulated lightning strikes. The lightning test is one of several ... more

Maintenance programs see red

Over recent years the costs associated with using infrared thermography have decreased, making the technology much more financially viable for the detection and monitoring of manufacturing and ... more
Test & Measurement

Current transducers from Aerco

A range of hall effect current transducers from New Zealand company, Raztec NZ, are now available in the UK from Aerco. The transducers are suitable for a variety of environments such as automotive, ... more
Test & Measurement

Ensuring effective protection

Even the most sophisticated of building lightning protection installations will be ineffective without good earth connections. This can only be ensured by testing. Here, Megger’s Paul Swinerd looks ... more
Test & Measurement

Shining a light on safety

Martindale Electric has introduced its new Drummond MTL10 and MTL20 test lamps which provide a visual indication of voltage between 50V and 500V AC/DC and offer the chance to safely detect and identify any faults in a circuit.

Both lamps feature a finger shield and insulated probe tip with only 4mm of exposed metal on both the lamp housing and the probe for added protection... more

Test & Measurement

Meeting the needs of PV testing

The introduction of the Feed-in-Tariff (FiT) last year has seen demand for solar PV grow rapidly. Obviously any solar PV installation has to comply with the relevant standards and regulations, and ... more
Test & Measurement

Enabling faster troubleshooting

Fluke has recently introduced its 750 Series Documenting Process Calibrators. Due to the fact that operating the 750 Series is very similar to the Fluke 743/744 Documenting Process Calibrators, users will be able to immediately start using the 750 Series, with no training being required. more
Test & Measurement

Plug-in for safety

Providers of test and measurement equipment, Martindale Electric, has introduced its new SB13 Safebreak Socket Test Adapter, an accessory for electricians that eliminates the need to remove the wall socket faceplate during electrical installation testing. more
Test & Measurement

Three new additions in ScopeMeter range

Fluke, a provider of electronic test and measurement technology, has introduced three new 2-channel models to its range of handheld, portable 190 Series II ScopeMeters. The Fluke 190-202, the Fluke 190-102 and the Fluke 190-062, offer 200MHz, 100MHz and 60MHz respectively, up to 2.5 GS/s real time sampling rate and 400ps resolution.


Test & Measurement

EMC test box

KEC has developed a purpose-built test box for Alstom Grid. The new KA0916 plugs into Alstom Grid VBE cabinets that are used as part of the company’s high voltage, direct current (HVDC) electronic ... more
Test & Measurement

Ensuring PV systems are compliant

Because photovoltaic (PV) systems can operate at 1,000V DC when installed, it’s imperative that they undergo electrical safety testing at the production stage of the panels and arrays to ensure ... more
Test & Measurement

Portable proving devices

The new PD440 and PD430 (below) proving devices are well suited for use with Drummond Test Lamps, Digital Multimeters and Low Impedance Voltage Testers, and also generate voltages up 450V, thus offering a greater level of operator safety.

Use of higher voltages than seen in the real world can be misleading, therefore voltage indicators should be proven at the normal working voltage... more

Test & Measurement

Offering an alternative to thermal imaging

Offered as a low cost alternative to thermal imaging cameras, The Schaeffler Group has introduced its new TempCheck PRO handheld non-contact infrared temperature measurement device. The TempCheck PRO ... more
Test & Measurement

New eco-friendly shock chamber

For testing in the automotive industry, Unitemp has introduced a new range of thermal shock chambers. The two models in the TSA series E-Type range feature a new eco-friendly design that offers energy savings of up to 37%.

For thermal cycle tests the ambient temperature range is 50°C to 200°C, and the low temperature range is -55°C to 0°C, with a temperature fluctuation of ±0.5°C. more

Test & Measurement

Search for a product/supplier:
-October 2021+