Rohde & Schwarz is presenting the first handheld oscilloscope with the functionality and touch and feel of a state-of-the-art lab oscilloscope.
The R&S Scope Rider combines five instruments in a compact format, and its rugged design makes it perfect for mobile installation and maintenance work. The instrument features isolated input and communications interfaces. It meets CAT IV standards and can carry out measurements on low-voltage installation sources up to 600 V.
The R&S Scope Rider from Rohde & Schwarz is equally impressive in the lab and in the field. With an acquisition rate of 50,000 waveforms per second, a 10-bit A/D converter developed by Rohde & Schwarz and a maximum bandwidth of 500 MHz for the analog input channels, this portable oscilloscope clearly outperforms comparable instruments.
The R&S Scope Rider integrates five functions to offer a level of versatility not found in any other instrument. It is based on a high-performance oscilloscope featuring a precise digital trigger system, 33 automatic measurement functions, mask test and XY diagram mode. Plus, the R&S Scope Rider can function as a logic analyzer with eight additional digital channels, as a protocol analyzer with trigger and decoding capability, as a data logger and a digital multimeter.
The handheld oscilloscope is the first to be equipped with a large-format capacitive touchscreen, allowing it to be operated as intuitively as a tablet PC. It also features large buttons for use with gloves and a practical multifunction wheel for convenient parameter adjustment. Users can confidently read their results at any time, as all measurement information is displayed in a clear, application-oriented manner on the brilliant screen.
Well prepared for harsh environments, the R&S Scope Rider’s IP51-certified housing offers protection from environmental hazards such as dust and dripping water. The handheld oscilloscope has passed all mechanical load tests in line with military standards. The fully isolated instrument offers maximum safety and meets the measurement category requirements defined in IEC 61010-1 for CAT IV up to 600 V and for CAT III up to 1000 V.
In addition to a microSD card, the instrument features USB and Ethernet ports for uncomplicated storage and transfer of measurement data. The R&S Scope Rider also has an integrated WLAN interface. This can be configured as a hotspot to allow the instrument to be remotely controlled via a smartphone, tablet PC or laptop. A simple web browser on the mobile device is all that is required. There is no need for additional software or apps.
With more than four hours of battery runtime, the 2.4 kg R&S Scope Rider offers users a high degree of flexibility during installation, maintenance and in emergency situations.
For more information visit: http://www.2-minutes.com/