READ THE LATEST
DIGITAL ISSUE

Electronics

Site search Advanced


Is the UK’s £16bn medical device market ready for the May 2020 EU MDR deadline?

Published: 23 March 2020 - Matt Surgeon, UK sales director, CCL Design UK

Standing at an estimated £16bn, the UK’s medical device market is the third largest in Europe, and the sixth largest in the world. Partly as a result of its global position and huge network of international suppliers, the industry has to manage its global supply chain risks very carefully, and ensure that it is up to date with the latest regulations. 

One significant piece of regulation looming large on UK medical device manufacturers minds (and the businesses involved in their supply chains), is compliance to the new EU Medical Device Regulation (MDR), which needs to be fully completed in around ten weeks (26th May 2020).

So, the clock is well and truly ticking. But, what has changed and how should medical device manufacturers respond?

Why the new regs?

The main objective of the EU MDR is to improve patient safety with stricter rules for the assessment of medical devices. These new regulations will improve the quality, safety and reliability of medical devices, while also strengthening the transparency of information for consumers. In addition, the new regulations aim to provide a standard review process for notified bodies and the industry. 

Reclassification of medical devices

One of the most significant changes is the introduction of a transitional period for certain low-risk medical devices, such as certain software and reusable surgical instruments, that are currently classified as Class I, which will be moved into a higher-risk class under the EU MDR. The regulations also encompass products without an intended medical purpose, such as contact lenses, dermal or other fillers, and equipment for liposuction to name but a few. Also, importantly, all the actors in the supply chain will now have potential responsibility for defects in devices – previously, the regulations focused solely on manufacturers.

As a result of the above, we’re advising our medical device clients that a good starting point is to review product portfolios, to understand which products need to comply.

The introduction of UDIs 

The changes will also mean that each device will now need to have a unique device identifier (UDI) that must be placed on the label and/or package of medical devices. The UDI produced for a device comprises a UDI-DI (device identifier – specific to a manufacturer and device) and a UDI-PI (production identifier – identifies unit of device production).

This UDI will then be logged on the European database for medical devices (EUDAMED), and the records will be updated to give a living picture of devices as they move through the supply chain, which will help detect and reduce counterfeiting. 

The UDI information assigned to medical devices will also need to be tracked by manufacturers, authorised representatives, importers, and distributors. Therefore, it is very likely that all these parties will need to modify their quality management system, to ensure information is not lost, but stored in a proper, systematic way.

Three steps to compliant labelling and traceability

From our experience of developing traceability products and systems for over 40 years, at CCL Design, we have found that, in general, companies require either printed products direct for their application, or digital printing systems so they can print on demand. There are three areas that medical device manufacturers should closely consider when starting out on the product labelling process:

1.     The most durable materials in the market - determining the right base material to provide the carrier of information requires durable flexible substrates that retain the information under stringent environmental testing. It is also necessary to combine the substrate with specialised adhesives, to ensure the information is adhered to the product for its lifetime, which may include washing cycles, high temperatures, and humidity. This must take into account the composition of the material it is being applied to, the surface texture, and surface energy.

2.     Quality and readability - the second consideration is how the information is printed. This needs to be compatible with the label substrate to ensure it provides a high-quality print that is durable and readable both electronically and by eye.

3.     A need for clarity – connected to point two, what may also go unnoticed with these new EU regulations are the importance of clarity of language, especially on content for the end user such as labelling. Here, the regulations state that the labelling must be ‘clearly comprehensible to the intended user’. Also, the Instructions for Use (IFUs) need to be part of the device’s technical dossier, and will now need to be submitted for review by notified bodies, along with the package labelling. 

Implementing a traceability system, including data capture, can be straight forward with proven off the shelf labels, hardware and software. But, ensuring that the system lasts the test of time, and is individually customised to the particular product and environment, is crucial.

For more on CCL Design, click here



 
Search for a product/supplier:
 
   
-May 2020+
SMTWTFS
262728293012
3456789
10111213141516
17181920212223
24252627282930
31123456