READ THE LATEST
DIGITAL ISSUE

Industrial Compliance

Site search Advanced


New fire standard BS 8592:2016 gives certainty to specifiers and installers

Published: 17 August 2016 - suzanne Callander

Fire resistant cables have been manufactured, distributed and widely used for many years but it has never had a full specification, which has resulted in some variability between cable manufacturers.

The new standard more clearly defines the design and performance specification giving specifiers, designers and installers greater certainty that the cable is fit for purpose. Dr Jeremy Hodge, chief executive at the British Approvals Service for Cables (BASEC) said: “Previously, cable manufacturers made reference to other similar standards and to test methods to support their design and manufacturing processes, however the new standard negates any grey areas. BS 8592:2016 will begin to be referenced in system design standards and it will deter any unsuitable alternatives from being used.” 

One of the major requirements to meet the new standard is to have ‘low emission of smoke and corrosive gases when affected by fire’. To describe a cable as Low Smoke Halogen Free (LSHF), it must generally pass two tests; a smoke cube test, which sets a maximum accumulated smoke density produced when burning the cable with a standard fire, and; a corrosive and acid gas test (related to the presence of halogens) where the cable materials are roasted in a tube furnace and must give off a maximum of 0.5% acid gas.

The cables are also subjected to an IEC 60331-3 dry fire resistance test to meet the requirements of the standard.

Dr Hodge said: “No water-based tests are included in the standard, but these can be carried out separately using special protocols for single core cables. Commonly, end users and regulators specify additional BS 6387 tests for single core fire resistance cable.”

Cable test and certification bodies, such as BASEC, cannot test cables for every fire-related eventuality, however, by having consistent testing methods detailed in product standards such as BS 8592:2016, it ensures that cable products provided by manufacturers for test can be directly compared to a specification to ensure performance is benchmarked.

Industry Connections: Basec


 
Search for a product/supplier:
 
   
-July 2020+
SMTWTFS
2829301234
567891011
12131415161718
19202122232425
2627282930311
2345678