READ THE LATEST
DIGITAL ISSUE

Process & Control

Site search Advanced


Sensors & instrumentation

New sensor from ABB offers the simple answer for accurate turbidity and suspended solids measurement

New addition to the Aztec 400 range offers accurate, ultra-stable solution for turbidity and suspended solids measurement with the lowest cost of ownership

ABB has launched the latest in its range ... 

(Ultra) low-flow Coriolis meter/controller with integrated laboratory solutions

Bronkhorst UK has announced the availability of their new mini CORI-FLOW Series ML120 Coriolis Mass Flow Meters and Controllers for (ultra) low flow ranges. The instruments are designed to provide ... 

Process loop calibration optimises plant stability

The calibration of analogue signals from myriad sensors and transducers in a process plant is essential not only to ensure correct readings on instruments but also for the feedback signals required ... 

Temperature loggers meet process needs

Omega has introduced a couple of new temperature data loggers in recent months. The RDXL6SD six channel handheld logger displays maximum, minimum, average and standard deviation and also displays ... 

Technology in insulation monitoring sees advances

There is a new insulation monitoring device ISOMETER iso685-D for unearthed AC, AC/DC and DC power supplies (IT systems) nominal AC/DC 0 - 690 V and DC 0 - 1000 V. 

Calibrating analysers

Gas analyzers are essentially molecule counters. When they are calibrated, a known concentration of gas is introduced, and the analyzer’s output is checked to ensure that it is counting correctly. ... 

Pressure Transmitters

Huba Control’s extensive range of transmitters include 2 compact design of relative and absolute transmitters.

The Pressure transmitter Type 520 has been developed for applications within the ... 

Level Sensing Pressure Transmitter

Huba Control has further enhanced its range of pressure sensors with the introduction of the Type 712 level sensing transmitter.

The pressure transmitter is manufactured using an absolute measuring ... 

Electronic Pressure Switches

Huba Control has enhanced its range of electronic pressure switches further with the introduction of two new programmable models the Type 540 and Type 548.

The parameters are easily adjusted with ... 

A sensor for extreme situations

VEGA has re-engineered limit switch technology, more commonly known as point level sensors, and developed the VEGASWING 66, a sensor for extreme situations. Holger Sack, head of product management, ... 

Specifying sensors with hygiene in mind

Cutting corners with sensor hygiene could be draining process equipment budgets, warns Phil Dyas, industrial sensors UK product manager at SICKA chain is only a strong as its weakest link. In food &... 

Ensuring the UK measures up

It costs a UK company much more to calibrate an instrument outside the UK than it does by using the National Measurement System (NMS), which is why many in industry are concerned by the freeze on NMS ... 

Filling the gap

In the world of temperature inspection, technicians have had to choose between single-point infrared thermometers and high-resolution thermal imagers. Not anymore says Fluke... Fluke has introduced ... 

Employee engagement equals effectiveness

For Overall Equipment Effectiveness (OEE) to be successful it needs to be culturally adopted from the top down and bottom up. Melanie Owens, MES technical consultant at EmsPT explains why this is so..... 

The importance of latitude and altitude

Mike Baker, director at Sherborne Sensors, details the science behind the influence of location on the accuracy of inertial sensors, and offers a more simplistic explanation of how gravity can affect ... 

Is it time to consider using LVDTs?

Lee Hudson, application engineer at Macro Sensors, shows how developments in LVDT linear position sensor technology has resulted in its increasing use in process applicationsToday’s industrial ... 

Is it time to consider using LVDTs?

Lee Hudson, application engineer at Macro Sensors, shows how developments in LVDT linear position sensor technology has resulted in its increasing use in process applicationsToday’s industrial ... 

Labfacility temperature connections

Advertisement featureA sound approach to connecting thermocouple probes in machineryCareful decisions must be made on how to connect the remotely located (machine) thermocouple sensor to the host ... 

Risk reduction

Problem: Valero Energy Corporation needed a safe way of monitoring and measuring hydrofluoric (HF) acid levels in real time. Commonly used in petroleum processing, HF is a highly toxic catalyst. ... 

Transmitters play by hygienic rules

Daniel Hunold, product manager at Baumer, outlines the benefits of the company’s PBMH pressure transmitters, showing how their hygienic design, ATEX compliance and temperature compensation mean they ... 

Alerting you to inefficient operation

Lisa Gingell, director, t-mac Technologies, explains how monitoring systems used to track the condition of plant floor equipment can be used to pre-empt and reduce machinery downtime - extending a ... 

Out of sight, but not out of mind

OnSite’s OS8000 multi- sensor meter offers users the opportunity to take a pro-active approach towards drainage asset management and maintenanceOut of sight, out of mind” – appears to be a fair ... 

Analyser built for ease-of-use

The latest addition to Emerson’s combustion flue gas analysis product range is the Rosemount Analytical Model 6888 in-situ oxygen analyser. The analyser provides accurate measurement of the oxygen ... 

Speedy sampling

Quantitech has introduced a range of automatic isokinetic samplers said to improve the speed, accuracy and reliability of sampling particulates and gases from chimneys, stacks and ducts.The Tecora ... 

There’s no need to risk accuracy

Calibration can provide a number of benefits for manufacturers, yet it may sometimes be neglected because it is associated with production downtime and high costs. Applied Weighing explains how its ... 

Keeping safety simple, as standard

Ian Curtis, safety consultant for Siemens Industry Automation advocates a ‘back to basics’ approach to ensure effective functional safety and says modern safety system tools can help reduce ... 

Just how ‘green’ is your energy management?

There are many wireless energy management systems on the market, all designed to track and reduce energy consumption, but how efficient are these products themselves? Lisa Gingell, director at t-mac ... 

 
Search for a product/supplier:
 
   
-April 2021+
SMTWTFS
28293031123
45678910
11121314151617
18192021222324
2526272829301
2345678