READ THE LATEST
DIGITAL ISSUE

Process & Control

Site search Advanced

 

2019
2018


Hazardous area & safety

FLIR Systems launches A310 ex - fully compliant with ATEX regulations

Explosive atmospheres need to be protected from ignition sources by selecting equipment and protective systems which meet the requirements of the ATEX Product Regulations or similar regulations. 

Keeps on running: battery-less UPS solution for hazardous areas

R. STAHL takes a new direction in the field of explosion-proof Uninterruptible Power Supply (UPS) solutions for zones 1/21 and 2/22. The 8265/C-TEC line provides backup power from capacitors mounted ... 

Lighter, brighter and with longer lives: New generation of robust fluorescent lights for hazardous areas

R. STAHL’s new line of light fittings for use in Ex zone 1/21 and 2/22 hazardous areas achieves better energy efficiency than comparable devices and provide approximately 10% more luminous flux. New ... 

IECEx and the global outlook on explosion protection

The IECEx system pursues a clear objective: the global harmonisation of explosion protection frameworks and the corresponding testing and certification practices. Once this is achieved, a piece of ... 

New communication component from Trebing + Himstedt for Emerson AMS Suite

A new software component for the AMS Suite from Emerson Process Management enables central management of HART devices in PROFIBUS networks that are connected by means of the IS1+ Remote I/O system. ... 

Tried-and-tested IS1+ system now features triple warranty

While other remote I/O solutions on the market usually have a one-year warranty, R. STAHL has voluntarily extended the warranty for its robust hazardous area IS1+ system to three years – without any ... 

R Stahl introduce their latest range of fluorescent lighting for use in hazardous areas

The EXLUX 6001 and EXLUX 6009 are the first linear fluorescent luminaires to have been tested and approved for hazardous areas pursuant to IECEX 60079-0 (2007-10); R Stahl has completely revised its ... 

Consistent and compliant safety procedures on all sites

With LINK360, Brady’s new safety software, the process of managing, creating, reviewing, scaling and visualising safety procedures becomes a matter of clicks. LINK360™ Software is an extremely ... 

New range of dust handling solutions available directly to end users

JEC Vac Solutions Ltd. recently added the Lajac range of dust handling products to their portfolio, now available direct to end users and OEM’s. Lajac was founded in 2000 with a long experience of ... 

Safe evacuations in the dark

We always practice evacuations while all the lights are on. But what if we had to evacuate during a blackout? Brady Product Expert Liz Gallagher has a safe, low cost solutionA safety evacuation plan, ... 

Safety covers for emergency stop buttons

Brady has launched a solution to temporarily prevent access to push buttons or emergency stop buttons in order to increase safety during machine maintenance. The new Twist and Secure safety solution can easily be applied by simply twisting the cover onto a permanent base, attached underneath the push button.  A padlock locks the push button safety cover in place until maintenance is done. Brady’s push button lockout solution fits all standard control button stem diameters, and is a low cost investment that saves lives. 

BMP41 label printer now available from Brady

 

Brady announces its newest handheld label printer, the BMP41. The new portable printer is easy-to-use and can print durable die-cut or continuous labels up to 25.4 mm wide for a variety of datacomm and electrical applications.

 
 

SIS upgrade is fail-safe and future-proof

A site-wide Safety Instrumented System upgrade has been carried out by Hima-Sella at MMA-based bulk chemicals producer LuciteHima-Sella has provided a turnkey solution for a Safety Instrumented ... 

Stay safe with reliable gas detection

In this Q & A, Dr Michael Strahand, general manager of Analytical Technology Europe, discusses the results of recent research into the dangers of gases in the workplace and provides legislation ... 

Controlling heat in hazardous areas

Robert Kuipers, product manager at Pentair Thermal Management, discusses the different control and monitoring solutions available for industrial heat tracing systems, and explains how local control ... 

Embracing regulatory requirements

Industry is littered with regulations that are often misunderstood, poorly communicated and acted on incorrectly, and this is especially relevant in oil based heat transfer systems in the food and ... 

ATEX certified load cells added to the range

The Deeter Group has added a range of ATEX certified load cells for industrial weighing applications to their series of ATEX and IECEx approved liquid level sensors. The load cells are available in ... 

Integrated approach puts safety first

Syngenta’s Huddersfield production site is using a safety instrumented system (SIS) from Siemens that is based on the integrated approach inherent in the site’s existing PCS7 process control ... 

Safety system company to work withTeesside Gas Processing Plant

Hima-Sella is providing emergency shutdown and automated overpressure protection systems in relation to one of the UK's most important gas fields... 

Rapid response reduces spill damage

Oil spills are an ongoing risk in the offshore industry, and any incident has the potential to cause far-reaching environmental, financial and reputational damage. Fortunately, Brady’s spill ... 

A new view on process alarm management

ProcessVue alarm management software from M.A.C Solutions is helping engineers at Drax Power Station identify, monitor and manage process alarms more effectivelyWith literally thousands of events ... 

Instruments rise to biogas challenge

With increasing volumes of UK waste now being processed to create biogas from AD (Anaerobic Digestion), Biogas plant operators need to ensure that working capacities are maintained and optimised ... 

Vertical liquid level sensors gain ATEX approval

The Deeter Group has attained ATEX and IECEx approval on a range of sensor products, enabling them to be used in hazardous environments and opening up a new market for the products.For example, ATEX ... 

Rupture discs provide relief

Elfab has introduced Ferrule Opti-Gard, a reverse acting disc designed for use in hygienic and aseptic applications.The rupture disc features 95% operating ratio and 3% tolerance. It is available in ... 

Triplex pumps now available for explosive areas

In response to increasingly frequent requests for ATEX pumps and pump packages, Cat Pumps UK has developed and tested a full range of high pressure triplex pumps for use in Explosive Atmospheres. The ... 

Integrally bunded tanks can store hazardous liquids

Forbes has developed the Minibulk-Total, a range of storage and process tanks, designed for hazardous liquids, which has an integral close fitting safety bund. At present capacities in excess of ... 

Remote I/O

The ANTARESplus remote I/O system from Bartec can be connected to any current control system using Profibus-DP, ProfiNet, Ethernet IP or Modbus TCP. The system is suitable for use in ATEX zone 1 and ... 

 
Search for a product/supplier:
 
   
-November 2019+
SMTWTFS
272829303112
3456789
10111213141516
17181920212223
24252627282930
1234567